Change-Over Button (Standard Settings) - KERN 572 Operating Instructions Manual

8.5 Change-over button (standard settings)

The change-over button
The following functions are set as per standard (<default>) in the different
weighing applications:
Short key pressing
➢ When pressed for first time:
Weih
➢ Switch-over between the
➢ When pressed for first time:
count
➢ Switch-over between the
➢ When pressed for first time:
check
➢ Switch-over between the
For more setting options please see the setup menu under < buttons >,
see chap. 13.3.1.
The standard settings (<default>) for the <Weighing> application are described
below.
T572-A-BA-def-2311
can be allocated with different functions.
Setting weighing unit
weighing units
Setting the reference quantity
weighing units
Setting weighing unit
weighing units
Long key pressing
➢ Display gross weight value
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
➢ When the balance has been tared
and the weighing unit is displayed,
you can change the display
between gross weight, net weight
and tare weight by pressing the
button long time.
25