KERN ABT Series Operating Instructions Manual page 133

Confirm your selection by pressing the [TARE] key. Printout "----
---- ADDON MODE ---------" takes place.
To exit the function, press the [ON/OFF] key.
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode. Whilst the add-on function is active, the
display keeps showing the add-on symbol [
Add up:
Operation
When using a container, place this on the weighing plate and
tare.
Prior to weighing the component press the [PRINT] key 1x.
Weigh first component.
Wait until standstill display ( ) appears, the weighing value for
the first component (CMP001) will be issued automatically to the
optional printer. This is followed by automatic taring.
Weigh second component
Wait until standstill display ( ) appears, the weighing value for
the second component (CMP002) will be issued automatically to
the optional printer. This is followed by automatic taring.
Weigh third component
When the last single weighing process is finished, press the
[ON/OFF] key to receive the total sum ("TOTAL=").
ABT-BA-e-1312
].
Display
5.0003 g
0.0000 g
5.0017 g
0.0000 g
5.0010 g
15.0030 g
61