Standstill Display - KERN ABT Series Operating Instructions Manual

13.2 Standstill display

If the display shows the stability display ( ) the balance is in a stable status. The
condition for judging stability is user-selectable. There are three levels to select: 1
count, 5 counts and 10 counts. The default setting is 1 count.
The setting of the standstill display can be checked on the setting control display
(see ch.12.6).
Setting the standstill display
Repeatedly press the [CAL] key until "FUnC.SEL" appears.
Press [TARE] key
Repeatedly press the [CAL] key until the current "b And:**" set-
ting appears.
(Example)
Press [TARE] key
You can use the [CAL] key to select between the following set-
tings:
"b-1"

"b-1"
"b-1"
The current setting is marked by the stability symbol ( ).
Confirm your selection by pressing the [TARE] key
To exit the function, press the [ON/OFF] key.
Brief actuation of ON/OFF key:
Back to previous menu.
Long actuation of ON/OFF key:
Back to weighing mode.
ABT-BA-e-1312
1 count
5 count
10 count
49