Changing The Display - KERN ABT Series Operating Instructions Manual

11.3 Changing the display

You can change the display to activated units, piece counting, percentage and densi-
ty determination mode by pressing the [UNIT] key several times.
The default setting provides the following options:
[g] → [%] → [Pcs] → [ct] → [g] → ...
Different settings have to be activated in the menu:
Repeatedly press the [CAL] key until "FUnC.SEL" appears.
Press [TARE] key
Repeatedly press the [CAL] key until "Unit.SEL" appears.
(Example)
Press [TARE] key
To select settings, use the [CAL] key:
Current settings are indicated by the standstill display ( ).

Confirm your selection by pressing the [TARE] key.
The [TARE] key is also used to deactivate a unit or function if

the corresponding setting with standstill display is shown in the
display.
Repeatedly press the [ON/OFF] key. This takes you back to the
menu/weighing mode.
ABT-BA-e-1312 35