Configuring/address space
4.3 Pulse train mode
4.3.2
Configuring
Introduction
You configure the technology module and assign its parameters with the configuration
software.
The user program controls and monitors the functions of the technology module via the
control interface and feedback interface.
System environment
The technology module can be used in the following system environments:
Possible use
Centralized operation
with a CPU 151xSP
Distributed operation
with an S7-1500 CPU
Distributed operation
with an S7-300/400 CPU
Distributed operation on
the PROFINET IO in a
third-party system
Distributed operation on
the PROFIBUS DP in a
third-party system
68
Components needed
ET 200SP automation sys-
•
tem
TM Pulse 2x24V
•
S7-1500 automation system
•
ET 200SP distributed I/O
•
system
TM Pulse 2x24V
•
S7-300/400 automation
•
system
ET 200SP distributed I/O
•
system
TM Pulse 2x24V
•
Third-party automation
•
system
ET 200SP distributed I/O
•
system
TM Pulse 2x24V
•
Third-party automation
•
system
ET 200SP distributed I/O
•
system
TM Pulse 2x24V
•
Configuration software
STEP 7 (TIA Portal):
Device configuration and param-
eter setting with hardware con-
figuration
STEP 7 (TIA Portal):
Device configuration and param-
eter setting with hardware con-
figuration
STEP 7 (TIA Portal):
Device configuration and param-
eter setting with hardware con-
figuration
STEP 7:
Device configuration and param-
eter setting with HSP
Third-party configuration soft-
ware:
Device configuration and param-
eter setting with GSD file
Third-party configuration soft-
ware:
GSD file; device configuration
and parameter setting using data
record 128
Technology Module TM Pulse 2x24V (6ES7138‑6DB00‑0BB1)
In the user program
Direct access to control
interface and feedback
interface in the I/O data
Manual, 05/2019, A5E35061186-AB