Configuration And Settings; Configuring The Siplus Hcs4X00; Profinet - Siemens SIPLUS HCS4 00 Series Configuration

6 Configuration and Settings

6.1 Configuring the SIPLUS HCS4x00

Configuration and Settings
6
The steps listed here are required for the integration of the "LHcs4x00" block library
into your existing project or when changing the example project.
In the example project, these steps have already been carried out for the pre-
defined configuration
6.1 Configuring the SIPLUS HCS4x00
6.1.1

PROFINET

In the following the hardware configuration in STEP 7 V14 SP1 via Hardware
Support Package (HSP) is described (\6\). Instead, you can also use the GSD file
for PROFINET (\17\).
Table 6-1
No.
1.
Open "Devices & networks" in the project tree.
Select the respective CIM in the hardware catalog in "Field devices > SIPLUS
2.
HCS".
HCS4x00Library
Entry ID: 109478117, V2.2.1,
(Figure 7-1).
09/2018
Action
53