Pid Monitoring - GSS HDMT 1000 MPTS Assembly Instructions Manual

Pid
m o n i to r i n g
The factory default of the PID monitoring is switched on.
If particular PIDs are not descrambled the CI module is reset. Additionally
dropouts may occur if several services are descrambled. To prevent this the
PID monitoring can be switched off.
• Use the
• Press the
Ca
m o d u l e
The menu varies according to which CA module you are using. For this rea-
son, please refer to the operating manual of your particular CA module. The
relevant information is shown in the display of the head-end station. This may
appear as a fixed display or as scrolling text according to display capabilities.
• Press the
Bx 4A 01/03
Information *)
Bx 4A
PID Check
buttons to switch "off" or "on" the PID monitoring.
button.
—> The "CA module" – "CA" menu is activated.
Bx 4A
Menu <=
—> By pressing the
"CA" menu and activate the "Output data rate" – "DATARATE" menu
(page 34).
button to activate the "MENU" menu of the CA module.
Bx 4A
Menu <=
M
MENU
CA
on
CA
=> Edit
button you can skip the "CA module" –
CA
=> Edit
Bx 4A TV Bx 4A TV
. . . . . . . .
- 38 -
X X 04/09 04/09
HDMT 1000 MPTS