Saving Settings - GSS HDMT 1000 MPTS Assembly Instructions Manual

• Press the
s
av i n g
• Press the
o
P e r at i o n
In order for this function of the CA module to be possible, in the "Station
filter" – "PROGRAM" menu (page 31) services must be selected which can be
descrambled by the CA module you are using and your smart card.
Where both scrambled and unscrambled services are transmitted, short-term
picture loss may occur when switching between scrambled and unscrambled
services.
—> The factory defaults are invoked ("FACTORY STORE").
—> By pressing the
item "Selecting the channel strip" without invoking the factory de-
faults (page 26).
button.
—> The factory defaults are saved. The display shows "STORE"
—> Back to "Selecting the cassette" (page 21).
—> By pressing the
item "Selecting the channel strip" without saving the factory defaults
(page 26).
—> If necessary set channel strip "B".
s e t t i n gs
button.
—> Back to "Selecting the cassette" (page 21).
—> The settings are saved.
—> If functions of the TPS module are activated, their status is shown in
the second line of the display:
"M" – Station filter is switched on.
—> By pressing the
item "Selecting the channel strip" without saving the programmed
data (page 26).
—> If necessary set channel strip "B".
Ca
w i t h a m o d u l e
button, you will be returned to the menu
button, you will be returned to the menu
button, you will be returned to the menu
- 37 - HDMT 1000 MPTS