GSS HDMT 1000 MPTS Assembly Instructions Manual page 22

iP
a d d r es s
If you choose to enter the Ethernet parameters manually, set the IP address of
the cassette in this menu. If "DHCP" is selected, the "IP-ADDR", "IP-MASK" and
"IP-GATEWAY" sub-menus display the parameters that were assigned automati-
cally by a connected server. If a server is not connected, "
appears in the corresponding menu. The star " * " in the display means that
the data is provided by a DHCP server.
• Use the
displayed to be set and use
• Press the
a
d d r es s
In this menu you define the address range for the cassettes connected to the
LAN network.
• Use the
displayed to be set and use
• Press the
o f t h e C a s s e t t e
Bx 4
192.168.
buttons to place the cursor under the digit of the IP address
button.
—> The "Address range" – "IP-MASK" menu is activated.
r a n g e
Bx 4
255.255.255.
buttons to place the cursor under the digit of the IP address
button.
—> The "Address of the gateway" – "IP-GATEWAY" menu is activated.
IP-ADDR
0.128
to set the desired IP address.
IP-MASK
0
to set the desired IP address.
- 22 -
0. 0. 0. 0*"
HDMT 1000 MPTS