GSS HDMT 1000 MPTS Assembly Instructions Manual page 25

asi
t r a n s f e r
In this menu you set the transfer rate for the ASI component connected.
For this setting please take the required information from the documentation
(technical data) of the ASI component to be connected.
• Use the
transfer rate then use the
• Press the
asi
o P t i o n s
In this menu you define the size of the data packets, their polarity and the type
of transmission.
For this setting please take the required information from the documentation
(technical data) of the ASI component to be connected.
• Press the
bits).
• If the polarity of the data to be transmitted has to be changed, press the
using the
• To change the type of transmission press the
cursor under "cont." (continuous – standard) and using the
"burst".
r at e
Bx 4
108000 KBits
buttons to place the cursor under the digits to be set for the
button.
—> The "ASI options" – "ASI OPTION" menu is activated.
Bx 4
188 pos. cont.
buttons to set the size of the data packets ("188" or "204"
buttons to place the cursor under "pos." (positive – standard) and
buttons set to "neg." (negative).
—> Setting "cont."
The data packets of the user data are spaced out evenly in the trans-
port stream.
ASI RATE
buttons to set the desired transfer rate.
ASI OPTION
- 25 -
buttons to position the
set to
HDMT 1000 MPTS