GSS HDMT 1000 MPTS Assembly Instructions Manual page 36

• Use the
hexadecimal number of the PID to be deleted ("0x0000") and set the hexa-
decimal number using
• Use
buttons.
• Press the
r
e n a m i n g
In this menu you can allocate a new address to a PID retaining the complete
data content.
• Use the
the hexadecimal number of the PID to be changed ("0x0000") and set the
hexadecimal number using
• Use the
hexadecimal number of the new PID ("–> 0000").
• Set the hexadecimal number using
• Use
• Press the
f
aC to ry
In this menu you can reset all settings to the factory defaults.
• Press the
buttons to place the cursor under the respective digit of the
to set the cursor to "off" and switch to "on" (delete) using the
button.
—> The "Renaming a PID" – "REMAP" menu is activated.
Pid
a
Bx 4A
0x0000 –> 0000
buttons to place the cursor under the respective digit of
buttons to place the cursor under the respective digit of the
to set the cursor to "off" and switch to "on" (rename) using the
buttons.
button.
—> The "Factory reset" – "FACTORY Defaults" menu is activated.
r e s e t
Bx 4A FACTORY
Defaults =>
button.
.
REMAP
off
.
.
Bx 4A FACTORY
▶
STORE => M
- 36 -
M
HDMT 1000 MPTS