GSS HDMT 1000 MPTS Assembly Instructions Manual page 27

Selecting the transmission protocol
• Press the
• Using the
Setting the port number
• Press the
" 1234".
• Use the
number displayed to be set.
• Using the
• Press the
q
ua n t i t y
f
o rwa r d
t
r a n s m i s s i o n
In this menu you set the quantity of the data packets to be transmitted, the for-
ward error correction FEC and the transmission channel. If the forward error
correction is used the data to be transmitted is encoded in a redundant way
so that the addressee can correct transmission errors.
Defining the quantity of data packets
• Using the
data packet ("1" ... "7").
button to position the cursor under "UDP" or "RTP".
buttons to select the desired transmission protocol:
—> "UDP" – The User Datagram Protocol is for the connectionless trans-
mission of data to a certain application. The port number of the
service is also sent which the data should obtain.
—> "RTP" – The Real-time Transport Protocol is for continuously trans-
mitting multimedia data streams in an IP network. Unlike UDP, the
header is transmitted which makes the data transmission more ro-
bust.
button to position the cursor under the port number e.g.
buttons to position the cursor under the digit of the port
buttons set the desired port number ("0" ... "65535").
button.
—> The "Quantity of data packets, Forward error correction, Transmis-
sion channel" – "PKTS / FEC" menu is activated.
o f data PaC k e t s
e r r o r C o r r e C t i o n
C h a n n e l
Bx 4A
7
buttons define the quantity of MPEG data packets in one IP
PKTS / FEC
off
- 27 - HDMT 1000 MPTS