GSS HDMT 1000 MPTS Assembly Instructions Manual page 28

Setting the forward error correction
• Press the
• Using the
"20/19").
Setting the transmission channel
• Press the
• Use the
"AnnexB").
• Press the
o
u t P u t
In this menu you set the output IP address for the channel strip selected. To this
IP address the desired services are allocated in the station filter.
• Press the
dress to be set.
• Using the
• Press the
button to position the cursor under "off" .
—> In position "off" the forward error correction (FEC) is switched off.
buttons set the desired value of the FEC ("off, 10/9" ...
Bx 4A
7
button to position the cursor under "Annex...".
buttons to set the desired transmission channel ("AnnexA" /
button.
—> The "Output IP address" – "OUT-IP" menu is activated.
iP
a d d r es s
—> Allocate different IP addresses to the channel strips.
buttons to position the cursor under the digit of the IP ad-
buttons set the desired IP address.
button.
—> The "LAN data rate" – "LAN RATE" menu is activated.
PKTS / FEC
10/09 AnnexB
Bx 4A OUT-IP
227. 40. 50. 60
- 28 - HDMT 1000 MPTS