Related Manuals for GSS HDE 200
Summary of Contents for GSS HDE 200
- Page 1 Head-End Digital Encoder HDE 200 CLASS Phone: +49 (0) 911 / 703 8877 Grundig SAT Systems GmbH Fax: +49 (0) 911 / 703 9210 Beuthener Strasse 43 Email: info@gss.de D-90471 Nuremberg Internet: http://www.gss.de...
-
Page 2: Table Of Contents
Setting the bit rate of the audio signal .............14 Setting the type and level of the audio signal ...........15 – Setting the type of the audio signal ............15 – Setting the volume ................15 Saving settings ..................16 - 2 - HDE 200... -
Page 3: Safety Regulations
At the end of its service life, please take your device to one of these public collection facilities for proper disposal. General information 2.1 Scope of delivery 1 HDE 200 cassette; 2 connection cables; 1 CD (assembly instructions) - 3 - HDE 200... -
Page 4: Technical Data
DATA 0 – (LSB) Data bit 0 (LSB), inverted DVALID+ Valid data word DVALID – Valid data word, inverted PSYNC+ Package sync PSYNC – Package sync, inverted Earth Connection strip (10-pin): for supply voltages and control circuits Socket RS-232: Update interface - 4 - HDE 200... -
Page 5: Description
2.3 Description The HDE 200 cassette is used to feed standardised analogue audio and video signals into 2 SPI data streams from completely different audio and video sourc- es (e.g. audio and video reproduction devices, test picture generators, observa- tion cameras etc.). It is equipped with 2 stereo/audio inputs and 2 video inputs. -
Page 6: Software Versions
• Insert the cassette in this slot and push it into the housing. • Align the cassette and apply slight pressure to connect it to the connections of the board on the back of the housing. • Fasten the cassette with the screws ACHTUNG! MESSAUSGANG Vor dem Cassettenwechsel unbedingt Netzstecker ziehen! CAUTION! Before changing cassettes remove mains plug! C LASS - 6 - HDE 200... -
Page 7: Connecting The Cassette
Tighten the nuts of the cable terminals until the teeth on the lock washers put under the nuts have penetrated the exterior coating and a good connection is made between the housing and cable terminal. Note: – The following connection example show possible connection schemes. - 7 - HDE 200... - Page 8 The "RS232" socket (9-pin Sub-D) is for updating the operating software of the cassette using a PC or notebook. Use the "BE-Flash" software as the update software. You can find the current operating software of the cassette on the website "www.gss.de". - 8 - HDE 200...
-
Page 9: The Control Panel At A Glance
The keypad on the head end station is used to scroll through the menus and menu items one at a time: scrolls forward through the menu. crolls backward through the menu. set values and triggers actions. select parameters in the menus. saves all entries. - 9 - HDE 200... -
Page 10: Programming
2.0 … 14 Mbit/s Bx 1A VIDEO Standard Standard / Sharp / Soft Bx 1A BITRATE Audio kbit/s 192 … 384 kbit/s Bx 1A AUDIO Stereo Stereo / Stereo J / Dual -11 dB … +11 dB - 10 - HDE 200... -
Page 11: Programming The Cassette
FBAS/ SVHS ware version" – "DVB" menu is activated. 4.43 / 3.58 4:3 / 16:9 Bx 1A BITRATE Video 4.0Mbit/s 2.0 … 14 Mbit/s Bx 1A VIDEO Standard Standard / Sharp / Soft - 11 - HDE 200 Bx 1A BITRATE... -
Page 12: Selecting The Channel Strip, Displaying The Software Version
-11 dB … +11 dB Bx 1A INPUT FBAS 4.43 FBAS/ SVHS 4.43 / 3.58 4:3 / 16:9 Bx 1A BITRATE Video 4.0Mbit/s 2.0 … 14 Mbit/s Bx 1A VIDEO Standard Standard / Sharp / Soft - 12 - HDE 200 Bx 1A BITRATE... -
Page 13: Setting The Type Of Video Signal
FBAS/ SVHS the output signal is also increased. 4.43 / 3.58 4:3 / 16:9 Bx 1A BITRATE Video 4.0Mbit/s 2.0 … 14 Mbit/s Bx 1A VIDEO Standard Standard / Sharp / Soft - 13 - HDE 200... -
Page 14: Setting The Picture Sharpness
BITRATE Audio kbit/s 192 … 384 kbit/s Bx 1A • Use the AUDIO keys to set the bit rate of the audio signal ("192" … "384" kbit/sec). Stereo Stereo / Stereo J / Dual -11 dB … +11 dB - 14 - HDE 200... -
Page 15: Setting The Type And Level Of The Audio Signal
("Stereo" / "Stereo J" / "Dual"). • Press to set the desired type of the audio signal. – Setting the volume • Press to select the volume setting ("– 11dB" … "+11dB"). • Use to set the desired volume - 15 - HDE 200... -
Page 16: Saving Settings
"Selecting the cassette" (page 11) from any menu. Any entries that have not yet been saved are reset to the "old" settings. – Set channel strip "B" as required. - 16 - HDE 200... - Page 17 Service: Phone: +49 (0) 911 / 703 2221 Fax: +49 (0) 911 / 703 2326 Email: service@gss.de Alterations reserved. Technical data E. & O.E. © by GSS GmbH 26112009...