Table of Contents
Advertisement
g
e n e r a l
The cassette is equipped with two channel strips ("A" and "B"). The channel
strips consist of the digital tuners and the digital signal processing levels. In
the head-end station display, the channel strips of the cassette are indicated
with "Bx ...A" or "Bx ...B". The channel strip "A" can decode encoded services
via a corresponding CA module. The cassette is programmed using the head-
end station control unit.
Two LEDs in the channel strips provide an indication with their colour whether
an RF signal is present or not.
The LEDs for the LAN interface show whether a network connection exists and
whether a data transfer is in progress.
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit.
To operate this cassette the software version of the control unit must be "V 45"
or higher. You can find the current operating software for the control unit and
the cassette, the required update software "BE-Flash" and the current assembly
instructions on the website "www.mygss.eu".
The cassette is designed for use in head-end stations of the standard line.
2.5 s
o f t wa r e
Control unit
If necessary, you can activate the indication of the software version of the
control unit manually:
• Press any two keys on the control unit of the head-end station simultaneously
until the display goes dark and the software version, e.g. "V 45" appears.
Cassette
After activating the cassette the software version of the cassette is displayed
(see page 21).
q u e ry
- 10 -
HDMT 1000 MPTS
Advertisement
Table of Contents
