HT ECLIPSE HT9025 User Manual page 17

10. Use arrow key
11. Press the arrow key
menu.
Command Emissivity (ECLIPSE)
12. Select item Emissivity
"
Emissivity to be used in Thermal Camera mode
13. Use the arrow keys
14. Press the arrow key
menu.
Command Recording
This command allows setting the parameters and activating the recording of the values of
the quantities measured by the instrument in Multimeter mode. For operating instructions,
see § 5.13.
Command Language
15. Select item Language
"
16. Use arrow keys
17. Press the arrow key
menu.
Command Settings
18. Select item Settings
"
screen appears on the display:
to select options: ON (activation), OFF (deactivation).
, key or key HOLD/REL to confirm and quit the general
and press keys
"
or to select the value within range: 0.01 ÷ 1.00
, key or key HOLD/REL to confirm and quit the general
and press keys
"
or to select the language among the available options.
Fig. 14: Language Menu
, key or key HOLD/REL to confirm and quit the general
and press key
"
Fig. 15: Settings Menu (ECLIPSE and HT9025)
or to set the value of parameter
or to enable language selection.
or to display system settings. The following
EN - 16
ECLIPSE - HT9025