Storage Of Measurement Results; Relative Measurement - HT ECLIPSE HT9025 User Manual

4.3.4. Storage of measurement results

1. Press key HOLD/REL to freeze the result. Message
the display (see Fig. 7 – right side)
2. Press key to save the value as a BMP image on the instrument
press key HOLD/REL again to quit the function.
3. Enter the General menu to display the saved result (see § 4.3.10).

4.3.5. Relative measurement

1. Long press key HOLD/REL to enter relative measurement (see Fig. 8
instrument zeroes the display and saves the displayed value as a reference value
which subsequent measurements will be referred to. Symbol
display. Functions
2. Press key HOLD/REL to freeze the result. Message
the display
3. Press key to save the value as a BMP image on the instrument
press key HOLD/REL again to go back to function REL.
4. Long press key HOLD/REL again or turn the selector switch to quit the function
Fig. 7: Saving the value frozen on the display
Fig. 8: Relative measurement
MAX/MIN and PEAK
" " "
HOLD
"
are not active in this mode.
"
HOLD
"
EN - 12
ECLIPSE - HT9025
and SAVE appears on
"
s internal memory or
'
right side). The
–
appears on the
" "
and SAVE appears on
"
s internal memory or
'