Pressure/Temperature Tests - Kane 456 Manual

4.3 PRESSURE/TEMPERATURE TESTING
Select "Prs/Temp". The pump stops automatically. Press
zero the pressure sensor. Using the black connectors and manometer hose, connect
to P1 for single pressure or P1 and P2 for differential pressure.
PRS/TEMP display
PRS 0.01m
m=
T1 75.1C
T2 40.2C
∆ T
34.9C
Press /
module).
Hold /
Viewing / printing a logged pressure/temp test
Select MENU / REPORT / PRS-TEMP / VIEW
Use or
Press /
WARNING
Before using the KANE456 to measure the pressure of a gas/air ratio valve, read the
boiler manufacturer's instructions thoroughly. If in doubt contact the boiler
manufacturer.
After adjusting a gas/air ratio valve it is essential that the CO, CO
readings are within the boiler manufacturer's specified limits.
→
mbar
→
→
→
→
→
to print a full pressure test, (or send to PC via optional Wireless
for 2+ seconds to log a pressure report.
to select the log number to be printed.
to print the test, (or send to PC via optional Wireless module).
Normal response or smoothed (damped)
response can be selected via "Menu".
'High' or 'Low' resolution readings can be
selected via "Menu".
Pressure units can be selected via "Menu".
Eg Flow Temp
Eg Return Temp
Differential Temp
/ to auto-
and CO/CO ratio
2 2
Page 16