Kane 456 Manual page 28

MENU SUB MENU
PRESSURE FILTER
RESOLUTION
UNITS
TIME
BACK
As you scroll up or down the side LEDs illuminate to point to the active line
NOTE: To EXIT the MENU at any time simply move the rotary switch to any
position other than "Menu". Any changes that have not been
"entered" will be ignored.
MENU SUB MENU
CONTRAST
SCREEN
BACKLIGHT
AUX
BACK
As you scroll up or down the side LEDs illuminate to point to the active line
NOTE: To EXIT the MENU at any time simply move the rotary switch to any
position other than "Menu". Any changes that have not been
"entered" will be ignored.
OPTIONS / COMMENTS
OFF = normal response.
ON = slower (damped) response
LOW = e.g. 0.01mbar resolution.
HIGH = displays to an extra decimal place
mbar, Pa, PSI, mmHg, hPa, InH
LET BY = Set duration of let-by test in minutes.
Default = 1 minute
STABIL'N = Set duration of stabilisation in minutes.
Default = 1 minute
TIGHTN'S = Set duration of tightness test in
minutes. Default = 2 minute
OPTIONS / COMMENTS
Factory setting is 14
0 to 300 secs
Enables users to customise the parameters on the
AUX display: LINE 1, LINE 2, LINE 3, LINE 4,
LINE 5, LINE 6, BACK
O
2
Page 28