Advertisement
Quick Links
KANE457
Quick Reference Guide
ON / OFF
Turns the analyser ON / OFF
PUMP
Turns the pump ON / OFF
Hold button to zero pressure
Stock No. 19294-2
© Kane International Ltd
July 2014
BACKLIGHT
Switches backlight & torch light ON /
OFF
SEND / ENTER
Send readings to printer
(Press button for 1 second.)
Send readings to memory
(Hold button down for 2+ secs.)
Advertisement
Related Manuals for Kane 457
Summary of Contents for Kane 457
- Page 1 SEND / ENTER Turns the pump ON / OFF Send readings to printer Hold button to zero pressure (Press button for 1 second.) Send readings to memory (Hold button down for 2+ secs.) Stock No. 19294-2 July 2014 © Kane International Ltd...
- Page 2 Flue probe temperature (T1) Battery charger connection Inlet temperature (T2) Flue Gas Inlet Pressure connection Watertrap Drain with Red Screw Plug Pressure connection P2 (differential) Fit Spigot to Hose before connecting to Analyser...
-
Page 3: Fresh Air Purge
BEFORE USING ANALYSER CHECK THE FOLLOWING: Particle filter is not dirty or wet. Water trap and flue probe hose are empty of water Water trap and red screw plug are fitted correctly to the analyser Flue probe hose is connected properly to the flue gas inlet Flue probe temperature plug is connected into T1 temperature connection Please read the Safety Warnings in the User Manual FRESH AIR PURGE... - Page 4 /EFF display Oxygen left after combustion. Should be 20.9% in fresh air. 55.1 Flue temperature, (C) 17.2 Inlet temperature. Normally set by flue probe during fresh air purge. EfC% 98.3 Condensing boiler efficiency (EfC). Can be changed via “Menu” Press SEND to print a full combustion test. (Also sends to PC if Bluetooth fitted). Hold SEND for 2+ seconds to log a full combustion report.
-
Page 5: Differential Temperature
When complete adjust the gas pressure if necessary then press to start the stabilisation period… STABIL’N Stabilisation display. 20.00 Real time pressure reading mbar TIME Stabilisation default time is 1 minute. Can be changed via “Menu”. When complete adjust the gas pressure if necessary then press to start the tightness test…... - Page 6 AMBIENT TESTS ROOM AIR TESTING Select “Room Test” for CO and CO investigations. Tests can be 15 or 30 minutes and can be stopped at any time by pressing the PUMP key. Please refer to user manual. ROOM AIR display - Real time CO reading (ppm) Real time CO reading, (ppm)
- Page 7 OTHER DISPLAY CODES -PO- = Pump Off -OC- = Open Circuit on temperature input FOR BEST PRESSURE SENSOR ACCURACY Switch the analyser on for 5 minutes to let the temperature stabilise. Zero the pressure sensor when the analyser in the exact position that it will be used.
- Page 8 USING THE MENUS Select “Menu” on the rotary switch and navigate using the function buttons… = Scroll up = Scroll down = Enter COMBUSTION MENU MAIN MENU SUB MENU OPTIONS / COMMENTS NAT GAS, L OIL (28/35 sec), PROPANE, BUTANE, LPG, PELLETS SETUP SET FUEL (Wood)
- Page 9 MAIN MENU OPTIONS / COMMENTS MENU OFF = normal response. PRESSURE SMOOTH ON = slower (damped) response LOW = e.g. 0.01mBar resolution. RESOLVE HIGH = displays to an extra decimal place PS UNITS mBar, mmH O, Pa, kPa, PSI, mmHg, hPa, InH LET BY = Set duration of let-by test in minutes.
- Page 10 AMBIENT MENU SETUP PASSKEY 1 1 1 1 SET TIME Uses Military time. 7am = 07:00, 7pm = 19:00 SET DATE Uses DD-MM-YY format EXIT Stored Room AIR tests, VIEW, DEL ALL or EXIT REPORT ROOM AIR (max = 20 tests) Stored Amb CO2 &...
- Page 11 13. Printouts KANE457 V 1.00G KANE457 V 1.00G KANE457 V 1.00G SERIAL NO. 000000000 SERIAL NO. 000000000 SERIAL NO. 000000000 YOUR COMPANY NAME & YOUR COMPANY NAME & YOUR COMPANY NAME & PHONE NUMBER HERE PHONE NUMBER HERE PHONE NUMBER HERE DATE 01/07/14 PRESSURE...
-
Page 13: Product Registration
PRODUCT REGISTRATION Please complete, detach and return to: Kane International Ltd Kane House, Swallowfield, Welwyn Garden City, Hertfordshire, AL7 1JG Your Details Name: Job Title: Company Name: Company Address 1: Address 2: Town/City: County: Postcode: Country: Phone Number: Fax Number:... - Page 14 Your feedback is important to us, please add any additional comments you would like to make with regard to your recent Kane purchase: Thank you for completing this survey. All the information we have collected is confidential. We do not sell or share data with any other company or organisation.
- Page 16 Thank you for buying this analyser. Before use, please register on our website www.kane.co.uk Scan the QR code to go directly to Register your Product on-line or complete, detach and return the Product Registration form in this manual.