Using The Analyser; Combustion Test - Kane 456 Manual

4.

USING THE ANALYSER:

4.1 COMBUSTION TESTS:
Insert the tip of the flue probe into the centre of the flue. The readings will stabilise
within 60 seconds assuming the boiler conditions are stable.
The rotary switch can be used to display the following information:
RATIO Display
NAT GAS
R 0.0008
CO
CO2
XAIR
PRS 0.01m
Press /
Wireless module).
Hold /
→
→
52p
→
6.3%
→
88.7
→
→
to print a full combustion test, (or send to PC via optional
for 2+ seconds to log a full combustion report.
Fuel type can be changed via "Menu".
CO/CO ratio.
2
Carbon monoxide (ppm).
Carbon dioxide (%).
Excess air %
Pressure reading
Page 12