Kane 456 Manual page 21

ROOM CO display
ROOM
CO
TEST
LOG
The user can stop the Room CO test at any time by pressing
If not stopped earlier, the Room CO test will automatically end after the designated
time.
The CO test series is automatically stored in the memory as a log number.
When completed the log can be printed immediately by pressing
Viewing / printing a logged Room CO test
Select MENU / REPORT / ROOM CO / VIEW
When LEDs are not flashing
Use the /
Press to cause the LEDs on that line to flash.
With the LEDs flashing, press
changed.
Press to select that change.
The LEDs stop flashing and
Use / to change the line again.
CO
→
00p
→
00
→
01
→
keys to change line.
/
/
CO readings are recorded every minute for
up to 30 minutes.
Real time CO reading (ppm).
Test 00 = initial CO test in series.
Test 30 = maximum of 30 tests in series.
The CO test series is automatically stored in
the memory as a log number.
to allow the parameter on that line to be
/ .
.
Page 21