Inspecting The Probe - Keysight N2804 User Manual

Introduction
Figure 1

Inspecting the Probe

• Inspect the shipping container for damage. Keep the damaged shipping
• Check the accessories.
• If the contents are incomplete or damaged, notify your Keysight Technologies
• Inspect the probe. If there is mechanical damage or defect, or if the probe does
If the shipping container is damaged, or the cushioning materials show signs of
stress, notify the carrier as well as your Keysight Technologies Sales Office. Keep
the shipping materials for the carrier's inspection. The Keysight Technologies
office will arrange for repair or replacement at Keysight Technologies' option
without waiting for claim settlement.
6
Probes (Accessories Not Shown)
container or cushioning material until the contents of the shipment have been
checked for completeness and the probe has been checked mechanically and
electrically.
Sales Office.
not operate properly or pass calibration tests, notify your Keysight Technologies
Sales Office.
N2804/5A Differential Probes User's Guide