Safety Information - Keysight N2804 User Manual

Safety Information

This manual provides information and warnings essential for operating this probe
in a safe manner and for maintaining it in safe operating condition. Before using
this equipment and to ensure safe operation and to obtain maximum performance
from the probe, carefully read and observe the following warnings, cautions, and
notes.
This product has been designed and tested in accordance with accepted industry
standards, and has been supplied in a safe condition. The documentation contains
information and warnings that must be followed by the user to ensure safe
operation and to maintain the product in a safe condition.
Note the external markings on the probe that are described in this document.
To avoid personal injury and to prevent fire or damage to this product or products
WARNING
connected to it, review and comply with the following safety precautions. Be aware that
if you use this probe assembly in a manner not specified, the protection this product
provides may be impaired.
Observe Maximum Working Voltage. To avoid injury, do not use the N2804A probe
WARNING
above ±300V between each input lead and earth or ±300V between the two input leads.
Refer to
Observe Maximum Working Voltage. To avoid injury, do not use the N2805A probe
WARNING
above ±500V between each input lead and earth or ±100V between the two input leads.
Refer to
Must be Grounded. Before making connections to the input leads of this probe, ensure
WARNING
that the probe is connected to the oscilloscope's channel input and the oscilloscope is
properly grounded.
The measurement category of a combination of a PROBE ASSEMBLY and an accessory is
WARNING
the lower of the measurement categories of the PROBE ASSEMBLY and of the
accessory.
Do Not Operate Without Covers. To avoid electrical shock or fire hazard, do not operate
WARNING
this probe with the covers removed.
N2804/5A Differential Probes User's Guide
"Specifications and Characteristics"
"Specifications and Characteristics"
Safety Information
on page 20 for more information.
on page 20 for more information.
17