Inspecting The Probe - Keysight N7020A User Manual

Inspecting the Probe

• Inspect the shipping container for damage.
• Check the accessories.
• If the contents are incomplete or damaged, notify your Keysight Technologies
• Inspect the probe. If there is mechanical damage or defect, or if the probe does
If the shipping container is damaged, or the cushioning materials show signs of
stress, notify the carrier as well as your Keysight Technologies Sales Office. Keep
the shipping materials for the carrier's inspection. The Keysight Technologies
office will arrange for repair or replacement at Keysight Technologies' option
without waiting for claim settlement.
Must be Grounded. Before making connections to the input leads of this probe, ensure
WARNING
that the probe's output connector is attached to the channel input of the oscilloscope
and the oscilloscope is properly grounded.
To protect against electrical shock, use only the accessories supplied with this probe or in
CAUTION
the accessory kit.
N7020A User's Guide
Keep the damaged shipping container or cushioning material until the contents
of the shipment have been checked for completeness and the probe has been
checked mechanically and electrically.
Sales Office.
not operate properly or pass calibration tests, notify your Keysight Technologies
Sales Office.
General Information
15
1