Handling The Probe - Keysight N2804 User Manual

Handling the Probe

Handle the probe with care and refer to the safety notices in this manual. The
probe cable is a sensitive part of the probe and, therefore, you should be careful
not to damage it through excessive bending or pulling. You should also avoid any
mechanical shocks to this product in order to guarantee accurate performance
and protection.
Always wear an ESD wrist strap when working with active probes. Not doing so can result
CAUTION
in the probe becoming permanently damaged.
Observe all of the product limits noted on the products labels and listed in
CAUTION
Information"
Figure 2
Figure 3
N2804/5A Differential Probes User's Guide
on page 17 and "Specifications and Characteristics"
N2805A Product Labels
N2804A Product Labels
Introduction
"Safety
on page 20.
7