Attaching Probe Accessories - Keysight N2804 User Manual

Attaching Probe Accessories

Attaching Probe Accessories
Before you can use the probe, gently push one of the supplied accessory tips onto
the probe leads as shown in
inserted between the tip and probe leads.
WARNING
To protect against electrical shock, use only the accessories supplied with this probe or in
CAUTION
the accessory kit.
This probe is to carry out differential measurements between two points on the circuit
CAUTION
under test. This probe is not for electrically insulating the circuit under test and the
measuring instrument.
Figure 6
14
Figure
Must be Grounded. Before making connections to the input leads of this
probe, ensure that the probe's output connector is attached to the channel
input of the oscilloscope and the oscilloscope is properly grounded.
N2804A
N2804A
300 MHz Differential Probe
Terminate with 50 Ω
Attaching an Accessory Tip
6. For N2804A probes, extension leads can be
N2805A
N2804/5A Differential Probes User's Guide
N2805A
200 MHz Differential Probe
Terminate with 50 Ω