Table of Contents
Advertisement
1
Using InfiniiMax III Series Probes
InfiniiMax III Probe Amplifiers
There are four InfiniiMax III amplifier models:
•
•
•
•
Each probe amplifier is pre-loaded with its specific measured S-parameters. When used
with the Infiniium 90000 X-series, the oscilloscope downloads these parameters and
automatically corrects the response of the unique probe system.
Figure 1
±4V Input Connector
Use this connector to connect the N5444-61601 Termination Voltage cable supplied with
the N5444A SMA probe head. See
Head"
Menu Button
Press this button to bring up the Probe dialog box in the oscilloscope GUI.
6
N2800A 16 GHz Probe Amplifier
N2801A 20 GHz Probe Amplifier
N2802A 25 GHz Probe Amplifier
N2803A 30 GHz Probe Amplifier
Before using the probe, refer to
WARNING
page 14 and
InfiniiMax III Probe Amplifier
on page 48 for information on this cable and its usage.
"Proper Handling Techniques"
"Safety Information"
on page 19.
"N5444A InfiniiMax III 2.92 mm / 3.5 mm / SMA Probe
InfiniiMax III Series Probes User's Guide
on
Advertisement
Table of Contents
