Specifications And Characteristics - Keysight N2804 User Manual

Specifications and Characteristics

Specifications and Characteristics
The following tables list the characteristics for the N2804A and N2805A
differential probes. Bandwidth and DC gain accuracy are the only warranted
specifications. Connect the probe to a powered-on oscilloscope for at least 20
minutes before any testing to allow the probe to warm up. Ensure that the
environmental conditions do not exceed the probe's specified limits.
Table 5 N2804/5A Safety and Regulatory Information
Description
CEI/IEC 61010-031 CAT II
This symbol indicates the Environmental Protection Use Period (EPUP) for the product's toxic substances for the
China RoHS requirements.
The CE mark is a registered trademark of the European Community. ISM GRP 1-A denotes the instrument is an
Industrial Scientific and Medical Group 1 Class A product. ICES/NMB-001 indicates product compliance with the
Canadian Interference-Causing Equipment Standard.
This product complies with the WEEE Directive (2002/96/EC) marking requirements. The affixed label indicates that
you must not discard this electrical/electronic product in domestic household waste. Product Category: With
reference to the equipment types in the WEEE Directive Annex I, this product is classed as a "Monitoring and Control
instrumentation" product. Do not dispose in domestic household. To return unwanted products, contact your local
Agilent office, or refer to www.agilent.com for more information.
Table 6 Environmental Specifications
Description
Temperature
Altitude
Humidity
Pollution Degree
20
Specification
Operating: +5 °C to +40 °C
Non-operating: –30 °C to +70 °C
Operating: 2,000 m (6,562 feet)
Non-operating: 15,300 m (50,196 feet)
Operating: 80% RH @ 31 °C decreasing linearly to 50% RH @ 40 °C
Non-operating: 25 – 85% room humidity
Pollution Degree 2
N2804/5A Differential Probes User's Guide