Transtig 2200 - Fronius TransTig 2200 Operating Instructions Manual

TransTig 2200

(3)
(2)
TransTig 800 / 2200 - front
No. Function
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(1)
(+) current socket with bayonet latch
for connecting
- the grounding (earthing) cable when TIG welding
- the electrode cable or grounding (earthing) cable during MMA welding (de-
pending on electrode type)
LocalNet connection
standardised connection socket for system add-ons (e.g. remote control, JobMas-
ter TIG welding torch, etc.)
Handle
Torch control connection
for connecting the control plug of a conventional welding torch
(-) current socket with bayonet latch
for connecting
- the TIG welding torch
- the electrode cable or grounding (earthing) cable during MMA welding (de-
pending on electrode type)
Shielding gas connection
Mains switch
for switching the power source on and off
Mains cable with strain relief device
(6)
(4)
(5)
TransTig 800 / 2200 - rear
(7)
(8)
41