Non-Volatile Memory - Keysight X Series Manual

Instrument Memory & Volatility

Non-Volatile Memory

Non-Volatile Memory
This section contains information on the memory components available in your
instrument.
The tables provide details of the size of each memory component, its type, how
it is used, its location, volatility, and the sanitization procedure.
N O T E
The instrument contains no user-accessible non-volatile memory, except for
the Disk Drive described in Item 7 of
also contain a removable SD Memory card. For this reason, as indicated in the
tables below, no sanitization procedure is required for any memory
components except the Disk Drive and SD Memory card.
Table 4-1 Summary of Non-Volatile instrument memory: all instruments
Memory
Component,
Type and Size
1. Front Panel No
EEPROM
64 kbit
2. EDID Memory No
(EEPROM)
2 kbit
3. Config & Cal No
Memory
(EEPROM)
8 kbit
4. Config & Cal No
Memory
(EEPROM)
8 kbit
Security Features & Document of Volatility
Purpose/Contents
Yes Contains software for
running front panel
microcontroller. Operates
front panel LEDs, and
transmits key presses to
processor.
Yes Extended Display
Identification Data.
Contains basic
information about a
monitor and its
capabilities.
Yes Header EEPROM used to
identify the assembly.
Yes Header EEPROM used to
identify the assembly.
Table 4-1. Instruments with Option PC6
Data Input Method Location in
Instrument and
Remarks
Programmed A1A2 Front
before installation. Panel Interface
Board
Contains no
user data.
Programmed A1A2 Front
before installation. Panel Interface
Board.
Contains no
user data.
Programmed A2 Analog IF
before installation. Assy.
Contains no
user data.
Programmed A3 Digital IF
before installation. Assy.
Contains no
user data.
Sanitization
Procedure
None.
None.
None.
None.
12