Agilent Technologies OmniBER OTN Series Performance Verification Manual page 83

Verification.book Page 80 Monday, January 19, 2004 1:40 PM
1
Performance Tests
80
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
51.84 Mb/s (STS-1) Output Mask Tests
1 Recall the OmniBER OTN's default setting as shown on
"Recall Default Settings"
2 Press <Menu>, select Tx/Rx > Transmitter Settings and set
the Signal Mode to SONET. Now set the Signal Rate to
STS-1 and set the Output Level to STSX-1.
3 Connect the 52 Mb/s OUT port to the Oscilloscope CHAN 1, using
the E2622A Termination Adapter Probe.
on page 11.
Verification Manual