Table of Contents
Advertisement
Verification.book Page 81 Monday, January 19, 2004 1:40 PM
OmniBER OTN
STS-1/STM-0e O/P
Verification Manual
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
STS-1/STM-0e Output
BNC to BNC cable
4 Load the STS1_ANSI_EYE.msk test mask and check the eye meets
the mask. See examples
It may be necessary to use Manual settings to Align this mask. If
NO TE
necessary change the selection in the scope Mask Test Set-up to allow
manual settings rather than File Set-up for Alignment.
Performance Tests
54810A Oscilloscope
CH1
1
E2622A
75/50Ω
Adapter
81
Advertisement
Table of Contents
