Agilent Technologies OmniBER OTN Series Performance Verification Manual page 87

Verification.book Page 84 Monday, January 19, 2004 1:40 PM
1
Performance Tests
84
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
155Mb/s Output Mask Tests
1 Press <Menu>, select Tx/Rx > Transmitter Settings and set
the Signal Mode to SONET. Now set the Signal Rate to
STS-3.
2 Load the STS3_ANSI.msk test mask and check the eye meets the
mask ( see example).
STS-3 Eye Mask Test
Verification Manual