Agilent Technologies OmniBER OTN Series Performance Verification Manual page 81

Verification.book Page 78 Monday, January 19, 2004 1:40 PM
1
Performance Tests
78
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
140 Mb/s Output Mask Tests
1 Press <Menu>, select Tx/Rx > Transmitter Settings and set
the Signal Mode to PDH/DSn. Now set the Signal Rate to
140 Mb/s.
2 Load the 140Mb_ITU_0.msk, 140Mb_ITU_1.msk and
140Mb_ITU_1_INV.msk test masks and check each of the
pulses are within the mask (see examples).
140Mb/s All Zeros Mask Test
Verification Manual