CyberData 011404 Operation Manual page 43

2.2.23.3 The Ring Volume
To adjust the
following steps:
1. Go to the
2. Select the
3. In the
4. Select Save.
2.2.23.4 The Sensor Volume
To adjust the
complete the following steps:
1. Go to the
2. Select the
3. In the
4. Select Save.
2.2.23.5 The Loopback Volume
To adjust the
complete the following steps:
1. Go to the
2. Select the
3. In the
4. Select Save.
Operations Guide
Setting
Ring Volume volume with the
Home Page.
Device Page.
Multicast Volume box, type a number between 0 (lowest) and 9 (highest).
Setting
Sensor Volume volume with the
Home Page.
Device Page.
Sensor Volume box, type a number between 0 (lowest) and 9 (highest).
Setting
Loopback Volume volume with the
Home Page.
Device Page.
Loopback Volume box, type a number between 0 (lowest) and 9 (highest).
931240M
Installing the SIP Loudspeaker Amplifier (AC-Powered)
SIP Loudspeaker Amplifier (AC-Powered) Setup
Ring Volume setting on the
Sensor Volume setting on the
Loopback Volume
Device Page, complete the
Device Page,
setting on the Device Page,
CyberData Corporation
35