Call Program - Physiomed vocaSTIM-Master Operating Instructions Manual

Individual Programs
(10) For saving other current modes proceed as described under 1-8.
(11) Exit the menu.
The selected settings are saved in the respective program and can now be accessed.
You can easily overwrite existing programs.
Note
For a better overview, the parameters saved for each position are
shown.

7.2 Call Program

To call a saved program proceed as follows:
(1) Select the menu
(2) Select one of the programs
(3) Select the symbol call program
The selected program is set. The respective menu appears in the display <3>.
The program number appears in the lower status bar <4> (e.g. F1) and an
additional indicator dot showing the position within the current sequence is
displayed.
Using a single therapy mode, you are only shown the program number.
When selecting a current sequence, you always have to turn the
Note
intensity to 0 and to reset it after every current mode before you can
apply the next current mode. This measure enhances the protection of
the patient.
34
from the display <3> and confirm.
INDIVID.
to with the data selector <5> and confirm.
F1 F25
and confirm.
vocaSTIM -Master
®