The Markings Used In This Document; Application - HBM T40FM Mounting Instructions

T40FM

1.2 The markings used in this document

Important instructions for your safety are specifically identified. It is essential
to follow these instructions in order to prevent accidents and damage to prop-
erty.
Symbol
CAUTION
NOTE
Emphasis
2

Application

The T40FM torque flange measures static and dynamic torques on stationary
and rotating shafts. Test beds can be extremely compact because of the short
construction of the transducer. This offers a very wide range of applications.
The T40FM torque flange is reliably protected against electromagnetic inter-
ference. It has been tested with regard to EMC according to the relevant
European standards, and carries the CE mark.
A3276-3.0 en/de
Important
Tip
Meaning
This marking warns of a potentially
dangerous situation in which failure to
comply with safety requirements can result
in death or serious physical injury.
This marking warns of a potentially
dangerous situation in which failure to
comply with safety requirements can result
in slight or moderate physical injury.
This marking draws your attention to a
situation in which failure to comply with
safety requirements can lead to damage to
property.
This marking draws your attention to
important information about the product or
about handling the product.
This marking indicates application tips or
other information that is useful to you.
This marking draws your attention to
information about the product or about
handling the product.
Italics are used to emphasize and highlight
texts.
9
HBM