Markings Used; Symbols On The Transducer - HBM T40FM Mounting Instructions

8
1

Markings used

1.1 Symbols on the transducer

Symbol:
Meaning: Read and note the data in this manual
Symbol:
Meaning: CE mark
The CE mark enables the manufacturer to guarantee that the product com-
plies with the requirements of the relevant EC directives (the Declaration of
Conformity can be found on the HBM website at
HBMdoc).
Symbol:
Statutory waste disposal mark
Meaning:
The electrical and electronic devices that bear this symbol are subject to the
European waste electrical and electronic equipment directive 2002/96/EC.
The symbol indicates that, in accordance with national and local environ-
mental protection and material recovery and recycling regulations, old devices
that can no longer be used must be disposed of separately and not with nor-
mal household garbage, see also Chapter 10, page 35.
HBM
www.hbm.com under
A3276-3.0 en/de
T40FM