52
14
Supplementary technical information
Axial and radial run‐out tolerances
To ensure that the torque flange retains its characteristics once it is installed,
we recommend that the customer also chooses the specified form and posi-
tion tolerances, surface quality and hardness for the connections provided.
HBM
0.02 AB
0.02 AB
Internal centering
Flange A
Hardness 47 2 HRC
0.8
Surface quality of the axial and radial
run‐out tolerances (A, B and AB)
0.02 AB
Flange B
T40FM
A
A3276-3.0 en/de