Technical Data - Festo MS6-SV Operating Instructions Manual

MS6−SV
13

Technical data

General information
Type
Installation position
Operating medium
Operating pressure p1
Switch−through pressure
Residual pressure in normal
operation
max. residual pressure in event
of fault (worst case)
Standard nominal flow
rate 1 −−> 2
Standard flow rate 2 −−> 3
Min. standard flow rate 2 −−> 3 in
event of critical fault
Ambient temperature
Temperature of medium
Voltage supply
Nominal value
Tolerance
max. current consumption
Protection against electric shock
(protection against direct and indirect
contact as per EN 60204−1/IEC 204)
Electrical protection class
Protection class
Fig. 18
Festo MS6−SV 0706NH English
MS6−SV
Any
Filtered compressed air, lubricated or unlu
bricated,
Grade of filtration 40 m
[bar] 3.5 10
[bar] approx. 50% of p1 (è Fig. 19)
[bar] 0 (no residual pressure)
[bar] 0.4 (if p1 = 10 bar and flow control valve is
fully open)
[l/min] 4 300 (if p1 = 6 bar, p2 = 5 bar)
[l/min] 9 000 (if p1 = 6 bar)
[l/min] 6 000 (if p1 = 6 bar)
[°C] −10 +50 (0
[°C] −10 +50 (0
[V DC] 24
[V DC] 21.6 26.4
[A] 1.0
By means of PELV power units
III
IP65 (as per EN 60529)
+50 with pressure sensor)
+50 with pressure sensor)
47