Operation - Festo MS6-SV Operating Instructions Manual

MS6−SV
Input and output switching characteristics in normal operation (when the
Automatic start" operation mode is set)
Operating
pressure p1
Output pressure p2
+L1: operating voltage
EN1: enable signal 1
EN2: enable signal 2
13/14: signalling contact
Power LED (green)
Fault LED (red)
Fig. 12
8

Operation

Note
In its process−reliable (i.e. pressurised) state, the MS6−SV's mechanical system is
not tested. If the process−related switching frequency (reliable exhausting) is less
than once a week, the machine's operator has to carry out a forced switch off.
Festo MS6−SV 0706NH English
43