Spare Parts - Process Technology LUFRAN Instruction

SPARE PARTS:

Listed below is the spare parts list for the Lufran fluoropolymer inline water heater.
These are items that may need replacement after some time in service. This is not
the complete parts list, so there are some heater components that are not listed
below. Please contact PROCESS TECHNOLOGY if a more complete parts list is
needed.
Spare Parts List Common to all Units:
Process
Technology
Part #
9978 POWER SUPPLY, 24VDC, 240W
OPERATOR INTERFACE PANEL,
9750
MONOCHROME 6" TOUCH-SCREEN
9004 BULB, REPLACEMENT
POWER OFF SWITCH ASSEMBLY
9826
(pushbutton, light, base, contact block)
POWER ON SWITCH ASSEMBLY
9827
(pushbutton, light, base, contact block)
4851 Alarm, Sonalert audible buzzer
9289 FAN: Cabinet Cooling Fan, 24 VDC
RELAY: SSR Module, 125Amps, 600VAC
9822 (One per heating column 24-52kW
(heat sink, two SSRs, overtemp thermostat, cooling fan, guard)
9961 HUMIDISTAT: HUMIDITY CONTROL
TC-L-KT-2.25 SENSOR: Inlet/outlet water temperature, J-type thermocouple
FUSE: 5A, 600V
4519
4538 FUSE: 1.5A, 600V
8640 FUSE: 6.25A, 600V
M-43-01
Revision - Date: 08 – 04/06/15
Description
- 97 -
Qty
1
1
1
1
1
1
2
1
1
2
1
2
3
Lufran Single Outlet Manual