Process Technology LUFRAN Instruction page 22

Plumbing (Continued):
Water Line Connections:
The following section details the installation procedure for the 25mm union connections
(plumbing designation = U).
procedure appropriate for that specific type of connection.
When tightening all connections on this unit, be sure to support the internal plastic
piping as close as possible to the plumbing connections, to prevent excessive torque or
strain from being applied to the internal plumbing of the unit.
The various plastic piping connections available (Unions, Flared tube fittings, etc) do not
require very much force to properly seal. Once the plumbing connections have been
made, test the connections for possible leaks and repair any leaks as needed.
Figure 11: Support Internal Piping when Connecting Plumbing (2-column unit shown)
M-43-01
Revision - Date: 08 – 04/06/15
For other types of plumbing connections follow the
Failure to properly secure the plastic piping
when tightening the plumbing connections may
result in internal damage to the plumbing of
this unit. Such damage is not covered under
our product warranty.
- 22 -
Lufran Single Outlet Manual