Facility Requirements; Space Requirements - Process Technology LUFRAN Instruction

FACILITY REQUIREMENTS:

Before installing the Lufran fluoropolymer inline water heater confirm the facility
requirements listed below.

Space Requirements:

The Lufran fluoropolymer inline water heater is constructed in a freestanding enclosure.
This cabinet includes the common framework for the heating column(s) as well as the
electrical components. No additional support is required.
The dimensions of the specific model are based upon the unit wattage. The cabinet
assembly requires ventilation. Locate equipment so that ventilation fans on the top and
bottom of the enclosure and louvers on the sides are not obstructed. The ventilation fan
exhausts through these openings, preventing overheating of the unit. Be sure to provide
adequate clearance for normal operation and maintenance of this heater.
Figure 5: Clearance Dimensions (Single Column 24-72kW Model Shown)
Heater Wattage Number of Heating
(kW)
24-72
105-144
(including 72kW,
208V unit)
157-288
M-43-01
Revision - Date: 08 – 04/06/15
Typical Cabinet Dimensions
Width
Columns
1 508mm (20-in)
2 712mm (28-in)
3-4 1220mm (48-in)
Depth
769mm (30.25-in)
769mm (30.25-in)
769mm (30.25-in)
- 14 -
Height
2123mm (83.57-in)
2123mm (83.57-in)
2123mm (83.57-in)
Lufran Single Outlet Manual