Process Technology LUFRAN Instruction page 20

Installing Seismic Brackets (optional):
This unit includes four seismic brackets in the event such brackets are a requirement for
the installation of this unit. The top-half of these brackets have already been installed
on the unit.
Figure 8: Seismic Brackets (top-half) Attached to Cabinet
If the heater installation requires that the seismic brackets be used, the bottom-half of
these seismic brackets may be secured to the floor and then fastened to the bracket
halves on the cabinet. The customer can decide whether to install the bottom half of the
brackets to face inward or outward, as shown below.
Bottom facing outward Bottom facing inward
Figure 9: Seismic Bracket Assembled, two possible orientations
M-43-01 Lufran Single Outlet Manual
Revision - Date: 08 – 04/06/15
- 20 -