Wiring - Process Technology LUFRAN Instruction

Wiring:

The wiring of this unit should only be performed by qualified technicians.
Before the plumbing is connected to this unit, verify that the electrical supply is shut off.
Apply any plumbing lockout/tagout devices as required by factory guidelines.
Incoming power should be routed through the electrical access panel on the top of the
unit. The power wires and ground wire must be connected to the main circuit breaker,
per the electrical prints, which are provided with this manual.
M-43-01
Revision - Date: 08 – 04/06/15
Verify that the electrical supply is shut off, and
any necessary lockout/tagout devices are
properly installed.
Figure 14: Electrical Access Panel
- 27 -
Lufran Single Outlet Manual