System Specifications - Process Technology LUFRAN Instruction

SYSTEM SPECIFICATIONS:

Product
Standards
Available Wattages
Available Voltages
Cabinet dimensions and
unit weight:
24kW – 72kW
105kW – 144kW
(Including 72kW, 208V unit)
157kW – 288kW
Wetted surfaces:
Heating elements
Columns and plumbing
o-rings
Operating temperatures:
Process inlet
Process outlet
Temperature accuracy
Ambient air temperature
Water flow rate range
Water pressure range
Purge gas flow rate
required (minimum):
24kW – 72kW
105kW – 144kW
(and 72kW, 208V unit)
210kW – 288kW
Purge gas pressure range
M-43-01
Revision - Date: 08 – 04/06/15
Lufran fluoropolymer inline water heater
CE, ETL, Semi S2/S3
24kW – 288kW
Refer to model number label for the wattage of any specific unit
380V – 600V, 50/60Hz, 3 phase only
(Lower voltages available with special construction, consult factory for
details)
Width
508mm (20-in) 769mm (30.25-in)
712mm (28-in) 769mm (30.25-in)
1220mm (48-in) 769mm (30.25-in)
PTFE fluoropolymer
PVDF
Chemraz®
50°C maximum
Up to 95°C, depending upon operating conditions
+/- 0.3°C, depending upon operating conditions
30°C maximum
1 l/min (0.25 gpm) to 200 l/min (50 gpm)
Minimum 69 kPa (0.69 bar, 10 psi)
Maximum 690 kPa (6.9 bar, 100 psi)
141 l/hr (5 scfh)
282 l/hr (10 scfh)
564 l/hr (20 scfh)
Minimum 175 kPa (1.75 bar, 25 psi)
Maximum 690 kPa (6.9 bar, 100 psi)
- 8 -
Depth Height
2123mm
(83.57-in)
2123mm
(83.57-in)
2123mm
(83.57-in)
Lufran Single Outlet Manual
Weight
270 kg
(595 lbs)
341 kg
(750 lbs)
682 kg
(1500 lbs)