Optional Communications; Ethernet Communications (-C1 Option ) - Process Technology LUFRAN Instruction

OPTIONAL COMMUNICATIONS:

Ethernet (-C1 option):
The –C1 communications option adds Ethernet communications to the PLC controller.
The network can interface with the Lufran heater through the RJ45 connector included
with the unit.
The Lufran heater is provided with the following default IP Address: 128.1.105.100.
Once connected to the network, the customer may wish to change the IP address.
Adjusting the IP Address or performing other networking tasks with the Lufran heater
will require the use of ENI Utilities software, available from Allen-Bradley.
software along with their instruction manual is available as a free download through
their website:
http://www.ab.com/plclogic/micrologix/networkinterfaces
M-43-01
Revision - Date: 08 – 04/06/15
Figure 40: Ethernet RJ45 connector plug
- 63 -
ETHERNET
CONNECTOR
PLUG (RJ45)
REMOTE
INTERFACE
CONNECTION
Lufran Single Outlet Manual
This