Spare Parts - Process Technology Lufran LUF Series Manual

Spare Parts:

Listed below is the spare parts list for the LUF-series Lufran fluoropolymer inline water heater. These are
items that may need replacement after some time in service. This is not the complete parts list, so there
are some heater components that are not listed below. Please contact PROCESS TECHNOLOGY if a
more complete parts list is needed.
Spare Parts List Common to all Units:
Process
Technology
Part #
13192 POWER SUPPLY, 24VDC, 240W
OPERATOR INTERFACE PANEL,
13205
COLOR 6" SCREEN
POWER ON SWITCH ASSEMBLY
10937
(pushbutton, light, base, contact block)
POWER OFF SWITCH ASSEMBLY
10938
(pushbutton, light, base, contact block)
EMO SWITCH ASSEMBLY
10939
(pushbutton, light, base, contact block)
7383 RELAY: SSR, 15Amps, 50VDC
RELAY: SSR Module, 125Amps, 600VAC
8986 (One per heating column 24-52kW
(heat sink, two SSRs, overtemp thermostat, cooling fan, guard)
4851 Alarm, Sonalert audible buzzer
9289 FAN: Cabinet Cooling Fan, 24 VDC
9961 HUMIDISTAT: HUMIDITY CONTROL
TC-L-KT-2.25 SENSOR: Inlet/outlet water temperature, J-type thermocouple
3947 FUSE: 10A, 600V
Additional Spare Parts for Specific Units:
Part for the
Process
Following
Technology
Wattage
Part #
Units:
**
**
Up to 52kW,
TC-L-KT
TC-L-KT-15
>130kW
M-43-25
Revision - Date 03-01-04-18
FUSE: high voltage power distribution
(Refer to page 1 of the electrical prints for the specific part
number of these fuses.)
HEATER: replacement heating column
(Refer to label on heating column for the specific model
number of this part)
SENSOR: heating column water temperature, J-type
105kW thermocouple, one sensor per column
65kW,
72kW, SENSOR: heating column water temperature, J-type
78kW, thermocouple, one sensor per column
Description
Description
58
LUF-Series Lufran Manual
Standard outlet, Standard Interface
Qty
1
1
1
1
1
1
1
1
2
1
2
4
Qty
3
1
1
1